FAN EM 50

Description :

The Shutter is traditionally the weak point in Conventional fans. But in this Euroemme fan shutter system which utilizes centrifugal energy generated by propeller to open the shutter has the following advantages :

  • 1. Counter Weights are not required.
  • 2. Shutters are always fully opened when fan is operating and are not affected by wind or dust accumulations.
  • 3. Shutters will not stick or hange if they are not periodically cleaned.
  • 4. Shutters are tightly closed whenfan is not operating.
  • 5. Because shutters are fully opened when the fan is operating shutter pressure drop is minimized.
  • 6. Shutter waving never occurs.
  • 7. Shutters are in galvanized steel, which is much stronger than ordinary aluminium shutter fans.

The Propeller has been designed to maximize air flow while minimizing energy usage. The round unique blade profile helps keep the propeller clean. It has the lowest propeller venturi clearance which results in higher efficiency and lower air turbulence. An energy efficent motor incorporates the highest standard for insulation and protection. It will even operate even on low voltage.

Dimension :

340 mm dia

Static Pressure in water Speed RPM Airflow CFM Efficiency CFM /Watt
0.00 378 20500 21.3
0.05 377 19100 19.1
0.10 376 17700 17.2
0.15 376 16000 15.2
0.20 376 13400 12.6
0.25 376 11100 10.6
0.30 375 7300 6.8

DHUMAL INDUSTRIES

E - 36, D Road, MIDC, Satpur, Nashik - MH, - 422007, India.
Tel: +91 253 2350384 / 2350684. Fax: +91 253 2351584.
Email: sales@dhumal.com Visit us:www.dhumal.com